Project Description

VIS101TN02 is a 10.1 inch TFT LCD display screen module model that adopts TN type LCD with a 1024*600 resolution. CTP (Capacity Touch Panel) and RTP(Resistive Touch Panel) can be added according to user requirements. Based on the substantial and long-term shipments of 10.1 inch LCD panels, we can guarantee a stable supply of this 10.1″ LCD display panel module throughout the life cycle of your product.

Based on this LCD’s low price and high stability, this type of LCD display module can be widely used in smart homes, electronic restaurant menus, industrial instruments, vehicle displays, and other products.

FPCA pin defines & shape alignment, polarizer material, and backlight brightness can all be adjusted according to your needs.

We also provide a 10.1 ” LCD module with 1280*800 resolution products for your choice. If interested, please contact us for more information.

Other 10.1 inch TFT LCD Display Screen Module(LCM) models(1024*600) that can be replaced by VIS101TN02 are G101STN01, M101NWT2, N101LGE-L11 (CMO1032), TM101DDHG01, etc.

Panel FromAUO/IVO
Panel Size10.1 inch
Panel ModelA101STN01, C101NWTG
LCM ModelVIS101TN02
Panel Typea-Si TN TFT-LCD, LCM module
Resolution1024(H) X 600(V)
Luminance350 cd/m² (Typ.)
Display Area222.72*125.28(mm)
Outline235.00*143.00*5.00(mm)
Interface Type40 pins  LVDS
View Direction6  o’clock
TouchscreenOptional
Operating Temperature0 ~ 50 °C
Storage Temperature-20 ~ 60 °C

Important:Due to the website layout and format limit, this specification & Datasheet of 10.1 inch LCD module is for reference only. For accurate SPEC&DATASHEET of the PDF format, please contact us.

1. General Specifications

VIS101TN02 is a TFT-LCD module. It is composed of a TFT-LCD panel, driver IC, FPC, a back light unit. The 10.1¢¢ display area contains 1024 x 600 pixels and can display up to 16.7M colors. This product accords with RoHS environmental criterion.

ItemContentsUnitNote
LCD TypeTFT
Display color16.7M
Viewing Direction12O’Clock
Gray scale inversion direction6O’Clock
Operating temperature-0~+50
Storage temperature-20~+60
Module sizeRefer to outline drawingmm
Active Area(W×H)222.72X125.28mm
Number of Dots1024×600dots
ControllerHX8282A14+HX8696
Power Supply Voltage3.3V
Outline DimensionsRefer to outline drawing
Backlight3X13-LEDs (white)pcs
Weightg
InterfaceLVDS


2. Absolute Maximum Ratings(Ta=25℃)

2.1 Electrical Absolute Maximum Ratings.(Vss=0V ,Ta=25℃)

ItemSymbolMin.Max.UnitNote
Power Supply VoltageVDD-0.35.0V1,2
AVDD6.513.5V
VGH-0.342.0V
VGL-200.3V
VGH-VGL40.0V

Notes:

  1. If the module is above these absolute maximum ratings. It may become permanently

Using the module within the following electrical characteristic conditions are also exceeded, the module will malfunction and cause poor reliability.

  1. VCC >VSS must be


2.2
Typical operation conditions

ItemSymbolValuesUnitRemark
Min.Typ.Max.
Power voltageVDD3.03.33.6V
AVDD10.210.510.8V
VGH202122V
VGL-5.0-5.5-6.0V
Input signal voltageVCOM3.33.74.2V
Input logic high

voltage

VIH0.7 VDDVDDV
Input logic low voltageVIL00.3VDDV


2.3
Environmental Absolute Maximum Ratings

ItemStorageOperatingNote
MIN.MAX.MIN.MAX.
Ambient Temperature-20℃60℃0℃50℃1,2
Humidity3
  1. The response time will become lower when operated at low temperatures.

2. Background color changes slightly depending on ambient temperatures.

The phenomenon is reversible.

  1. Ta<=40℃:85%RH MAX.

Ta>=40℃:Absolute humidity must be lower than the humidity of 85%RH at 40℃.


3. Electrical Specifications and Instruction Code

3.1 Electrical characteristics(Vss=0V ,Ta=25℃)

ParameterSymbolConditionMinTypMaxUnitNote
Power supplyVCCTa=25℃3.03.33.6V
Input voltage‘H’VIHVCC=3.3V0.8VCCVCCV
‘L’VILVCC=3.3V00.2VCCV
Current ConsumptionICC1Normal mode50mA2
ICC2Sleep mode0.2mA2
Clock FrequencyfCLK50MHz

Note:

1:When an optimum contrast is obtained in the transmissive mode —

2: Tested in 1╳1 chessboard pattern.


3.2
LED backlight specification(VSS=0V ,Ta=25℃)

ItemSymb

ol

ConditionMinTypMaxUnitNote
Supply voltageVfIf=20X13mA9.0V
UniformityΔBpIf=20X13mA70%
Luminance for LCDLvIf=20X13mA350Cd/m2
Life TimeTIf=20X13mA30000Hours


3.3
Interface signals

Pin No.SymbolI/OFunction
1VCOMPCommon voltage
2-3VDDPPower for digital circuit
4NCNo connect
5RESTIGlobal reset pin
6SBYBIStand mode:

SBYB=1,normal operation

SBYB=0,timing control,source driver will turn off,all output are hight-Z

7GNDPGround
8RXIN0-I-LVDS differential data input
9RXIN0+I+LVDS differential data input
10GNDPGround
11RXIN1-I-LVDS differential data input
12RXIN1+I+LVDS differential data input
13GNDPGround
14RXIN2-I-LVDS differential data input
15RXIN2+I+LVDS differential data input
16GNDPGround
17RXCLKIN-I-LVDS differential clock input
18RXCLKIN+I+LVDS differential clock input
19GNDPGround
20RXIN3-I-LVDS differential data input
21RXIN3+I+LVDS differential data input
22GNDPGround
23-24NCNo connection
25GNDPGround
26NCNo connection
27DIMOIBlacklight CABC controller signal output
28SELBI6bit/8bit select

H:6bit, L:8bit

29AVDDPPower for analog circuit
30GNDPGround
31-32NCNo connection
33L/RIHorizonal inversion
34U/DIVertical inversion
35VGLPNegative power for TFT
36CABCEN1ICABC H/W enable
37CABCEN0ICABC H/W enable
38VGHPPositive power for TFT
39-40NCNo connection


4. Optical Characteristics

ItemSymbolConditionMin.Typ.Max.UnitNote
BrightnessBpθ=0°

F=0°

350Cd/m21
Uniformity⊿Bp70%1,2
Viewing Angle3:00Cr≥1060Deg3
6:0045
9:0060
12:0060
Contrast

Ratio

Crθ=0°

F=0°

3005004
Response TimeTr10ms5
Tf10ms
Color of CIE

Coordinate

Wxθ=0°

F=0°

0.281,6
y0.33
Rx0.51
y0.34
Gx0.31
y0.56
Bx0.15
y0.14
NTSC

Ratio

S5060%

LCD OPTICAL CHARACTERISTICS definition 2LCD OPTICAL CHARACTERISTICS definition 1LCD OPTICAL CHARACTERISTICS definition 3LCD OPTICAL CHARACTERISTICS definition 4


5. Reliability Test Items and Criteria

NoTest ItemTest conditionCriterion
1High Temperature Storage60℃±2℃ 96H

Restore 2H at 25℃ Power off

1. After testing, cosmetic and electrical defects should not happen.

2. Total current consumption should not be more than twice of initial value.

2Low Temperature Storage-20℃±2℃ 96H

Restore 2H at 25℃ Power off

3High Temperature Operation50℃±2℃ 96H

Restore 2H at 25℃ Power on

4Low Temperature Operation0℃±2℃ 96H

Restore 4H at 25℃ Power on

5High Temperature/Humidity

Operation

40℃±2℃ 90%RH 96H

Power on

6Temperature Cycle20℃←-– – – – – – – – →60℃

30min 5min 30min

after 5 cycle, Restore 2H at 25℃ Power off

7Vibration Test10Hz~150Hz, 100m/s2, 120minNot allowed cosmetic and electrical defects.
8Shock TestHalf- sine wave,300m/s2,11ms

Note: Operation: Supply 3.3V for the logic system.

The inspection terms after reliability test, as below

ITEMInspection
ContrastCR>50%
IDDIDD<200%
BrightnessBrightness>60%
Color ToneColor Tone+/-0,05


6. LCM outline Drawing
10.1 inch TFT LCD Display Screen Module Structure

7. Precautions for Use of LCD Modules

7.1 Handling Precautions

  • The display panel is made of glass. Do not subject it to a mechanical shock by dropping it from a high place, etc.
  • If the display panel is damaged and the liquid crystal substance inside it leaks out, be sure not to get any in your mouth, if the substance comes into contact with your skin or clothes, promptly wash it off using soap and water.
  • Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary.
  • The polarizer covering the display surface of the LCD module is soft and easily scratched. Handle this polarizer carefully.
  • If the display surface is contaminated, breathe on the surface and gently wipe it with a soft dry cloth. If still not completely clear, moisten the cloth with one of the following solvents:
    • Isopropyl alcohol
    • Ethyl alcohol

Solvents other than those mentioned above may damage the polarizer. Especially, do not use the following:

  • Water
  • Ketone
  • Aromatic solvents
  • Do not attempt to disassemble the LCD module.
  • If the logic circuit power is off, do not apply the input signals.
  • To prevent destruction of the elements by static electricity, be careful to maintain an optimum worka. Be sure to ground the body when handling the LCD modules.
    b. Tools required for assembly, such as soldering irons, must be properly ground.
    c. To reduce the amount of static electricity generated, do not conduct assembly and other work under dry
    d. The LCD Module is coated with a film to protect the display surface. Be care when peeling off this protective film since static electricity may be generated.

7.2 Storage precautions

  • When storing the LCD modules, avoid exposure to direct sunlight or to the light of fluorescent lamps.
  • The LCD modules should be stored under the storage temperature range. If the LCD modules will be stored for a long time, the recommend condition is: Temperature : 0℃ ~ 40℃
    Relatively humidity: ≤80%
  • The LCD modules should be stored in the room without acid, alkali and harmful gas.

7.3 The LCD modules should be no falling and violent shocking during transportation, and also should avoid excessive press, water, damp and sunshine.

  • Long life cycle

  • High stability

  • Low price

INQUIRY NOW!